Phone: +34 932 310 811 - surisa@surisa.es

The operation of temperature indicators and LCD thermometers is simple, so it does not require specific indications. Just stick it on the surface to control the temperature. Anyway, if you have any complications in gluing due to the surface, or in reference to the result of the temperature measurement, do not hesitate to contact us through the section contact us.

However, those indicators whose temperatures may be below the ambient or body temperature, do require some recommendations for use, which you will find below.

Regarding inks and paints, they are somewhat more complex products in their use and require prior knowledge, on printing or on the operation of thermochromic paints. In section Technical documentation You can find more specific information if you cannot find what you are looking for here. You can also contact us and we will be happy to advise you.


Below you will find some documents on use and recommendations that you can consult and download if you wish:

  • IRREVERSIBLE INDICATORS WITH TEMPERATURES 29 to 34 Instructions for Use  
  • PIGMENT SLURRY Recommendations Use   
  • LIQUID CRYSTAL SENSORS Instructions for Use  
  • TDI Instructions for use   
  • TEMPASURE Instructions for use   
  • EPOXY INK Recommendations Use 
  • LCD ENVIRONMENTAL THERMOMETER Instructions for use   
  • GO - NOGO INDICATOR Instructions for use   
  • HAND HOT INDICATOR Instructions for use   
  • LCD FRIDGE THERMOMETER Instructions for use   
  • TRAFFIC LIGHT INDICATOR Instructions for use